Queen 226 Evo Syn.

Queen 226 Evo Syn.

Welding power source MIG MAG inverter synergic a 1Ph  200A

APPLICATIONS
Building Sites, Medium-Light carpentry, Maintenance, Repair, Assembly, Installation, Machinery construction, Automotive, Agriculture, Craft industry.

MATERIALS
Unalloyed steel, Low-alloy steel, Alloy steel, Stainless steel, Galvanized Steel, Aluminium alloys, Copper Alloys

FUNCTION
Synergic SG2, Al-SI, Al-Mg, CuSi3
Pre gas-Post gas

FOCUS

  • 15 kg inthernal Spool
  • Job save
  • Display 3.5″

FACTORY CONFIGURATION

  • 2 rolls wire feeder motor
  • Rolls 0.8/1.0
  • Display TFT 3.5″
Share
Get a quote
Get a quote

Details

    Data Sheet  
Supply voltage   230 V 230 V
    MIG-MAG MMA
Output range    15 A - 200 A 20 A - 140A
Duty Cycle 35% 200 A 140 A
  60% 170 A 115 A
  100% 130 A 100 A
Open circuit voltage   60 V 60 V
Frequency   50 / 60 Hz 50 / 60 Hz
Mains fuses (delayed action)   16 A 16 A
Max. connected power   4.0 KW 2.9 KW
Recommended generator rating   6.7 KW 4.9 KW
Cos j   0.7 0.7
Protection classification   IP 21 s IP 21 s
Insulation class   H H
Rolls   2 -
Wire speed   2 ÷ 16 m/min -
Torch connection   Euro Dinse
Dinse   50 mm2 50 mm2
Weight   17 Kg 17 Kg
Dimensions (WxLxH)   220X560X420 mm 220X560X420 mm
Wire   0.6 - 1.0 -
Electrode Ø - 1.5 - 3.25
Elettrodo Cell. Ø mm - -
Features      
Hot start/ Arc force/ Anti Sticking   - / - / - */ * / *
Synergic - SG2 - AL-SI - AL-MG CuSi3   * -
TIG torch connection   - -
Pre gas / Post gas   Automatic -
Start / end current   - -
Slope up / down   - -
Double short   - -
Trolley   C9 - C11 C9 - C11
Internal Spool   15 Kg 15 Kg
5T5.226.202 QUEEN 226 EVO SYNERGIC
049.600.055 Cable with earth clamp 25 mm2 - dinse 50 mm2 - 3 m
049.600.056 Cable with earth clamp 35 mm2 - dinse 50 mm2 - 3 m
043.600.140 Torch F 15 - 3 m - 150A@60%
280.500.002 Gas regulator 2 manometers micro CO2
580.600.002 “C 3” Trolley 
580.690.005 C 9 Trolley 300mm spool support
580.690.007 “C11“ Trolley
  ACCESSORY TIG
043.600.232 Kit cavi completo 25 mm2 - dinse 50 mm2 - L=3+2
  ACCESSORY TIG
489.603.411 Kit cavi completo 25 mm2 - dinse 50 mm2 - L=3+2
  ROLLS
422.500.100 Roll 0,6-0,8 D.30 - V groove (steel, stainless steel)
422.500.101 Roll 0,8-1,0 D.30 - V groove (steel, stainless steel)
422.500.304 Roll 1,0-1,2 D.30 - V groove (steel, stainless steel)
422.500.102 Roll 0,8-1,0 D.30 - U groove (aluminium)
422.500.316 Roll 1,0-1,2 D.30 - U groove (aluminium)
422.500.103 Top roll 0,8 D.30 - U groove (aluminium)
422.500.104 Top roll 1,0 D.30 - U groove (aluminium)
422.500.317 Roll 1,0-1,2 D.30 - Knurled groove (flux cored)
422.500.315 Roll 1,2-1,6 D.30 - Knurled groove (flux cored)